All Cases

This extra large polycarbonate case is extremely robust. The mock suede interior is very well padded to hold cues securely in place. This interior has four channels, two of which run the full length ofthe case. The other channels and storage channels either side of the handle can be used for butt sections and extensions. This means that the case will hold two cues and still take additional extensions in the other shorter channels. The case exterior has a superb looking black polycarbonate finish and four combination locks for security. *IMPORTANT: THE INTERIOR LENGTH OF THIS CASE WILL ONLY ACCEPT A SHAFT OF LENGTH UP TO 44"(112cm). This means that it will only accept Three Quarter Jointed Peradon cues (which are 58" long) with joints either 14" or 16" from the butt. THIS CASE WILL NOT ACCEPT 3/4 JOINTED PERADON CASES JOINTED 12" FROM THE BUTT.

All sizes are nominal.

Seven Compartment sizes are 112cm, 112cm, 79cm, 77cm, 43cm, 41cm & 31cm,

Aluminium Case for Two Piece Cues
This aluminium construction case offers maximum protection for your cue. The hinge is an integral part of the shape of the case making it extremely robust. The high quality chrome catches also lock and are supplied with two keys. The interior is black flocked foam to hold the cue securely in place.

Black and White Clubman Case for One Piece Cues
This attractive and robust case with leather look covering and attractive embroidery offers superb value for money. The mock suede interior is padded to hold the cue securely in place.

Halo cases are of aluminium construction and offer both maximum cue protection and superb looks. The exterior is upholstered with hard wearing leather look material to create a very attractive cue case. The hinge is an integral part of the shape of the case making it extremely robust. The catches are of the highest quality with a highly polished chrome finish. The interior is black flocked foam to hold the cue securely in place. As the foam interior has two channels the case will also hold any screw in extensions that may also be required (or even two cues).

All sizes are nominal.

If you would prefer a narrower Halo case that will only hold one cue please
see the Halo Thin case.

This black attache style case features a black flocked foam interior to hold the cue securely in place. As the foam interior has two channels the case will also hold any screw in extensions that may also be required (or even two cues).

Black & Red Patch 'Halo' Thin Case for One Piece Cue
Halo cases are of aluminium construction and offer both maximum cue protection and superb looks. The exterior is upholstered with hard wearing leather look material to create a very attractive cue case. The hinge is an integral part of the shape of the case making it extremely robust. The catches are of the highest quality with a highly polished chrome finish. The interior is black flocked foam to hold the cue securely in place. Many players like this case as holding just one cue it is very thin and easy to handle. If you would prefer a wider Halo case with more interior channels see the Halo Wide or the Extra Wide Halo Plus.

This extra large polycarbonate case is extremely robust. The mock suede interior is very well padded to hold cues securely in place. This interior has three channels running the full length of the case and two shorter channels either side of the handle. This means that the case will hold three cues and still take additional extensions in the two shorter channels. The case exterior has a superb looking black polycarbonate finish and four combination locks for security.

All sizes are nominal.

Black leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior of the case has an agled divider to neatly hold a two piece cue in place and a separate compartment for storage of chalk. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black and Red leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with sued leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. Although designed to hold a one piece cue this case has two channels so the case will also hold any screw in extensions that may also be required (or even two cues). The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black and Blue leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with sued leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. Although designed to hold a one piece cue this case has two channels so the case will also hold any screw in extensions that may also be required (or even two cues). . The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with sued leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. Although designed to hold a one piece cue this case has two channels so the case will also hold any screw in extensions that may also be required (or even two cues). The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black and Red patchwork pattern leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with sued leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. Designed to hold just one cue, this case appeals to many players as it is so thin and easy to handle. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black and Blue patchwork pattern leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with sued leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. Designed to hold just one cue, this case appeals to many players as it is so thin and easy to handle. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with sued leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. Designed to hold just one cue, this case appeals to many players as it is so thin and easy to handle. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

MacMorran Two Piece Cue Case (for one cue) 
This American Pool style, hard tubular case has a zipped opening at one end to accept a two piece, center jointed cue. The interior has a divider to keep the two cue sections separate and well protected. One the outside of the case is a zipped pocket which is ideal for holding chalk and other accessories. The case is also fitted with an adjustable shoulder strap making it easy to carry.

Black & brown patchwork case. This beautifully styled leather look case features an attractive black and brown patchwork design . The interior has a complimentary black and brown mock sued finish with a separate compartment for chalk storage. With an interior length of 47¾” this case will accept most ¾ jointed cues with an extension and mini butt.

All sizes are nominal.

This stunning case has the looks of leather without the cost, with rounded ends and attractive embroidery it offers superb value for money. With an interior length of 47” this case will accept most ¾ jointed cues with an extension and mini butt.

All sizes are nominal.

Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skilfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black & Blue Large Diamond leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Welsh Flag design leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal

Irish Flag design leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Scottish Flag design leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

England Flag design leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Union Jack design leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with sued leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black & Yellow leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with sued leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Green & Cream Patchwork pattern leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.

Black & Royal Blue Small Diamond leather cue case. Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skillfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47” and along with the butt section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.