Cues

Simulated Butt Pool Cues
Basic pool cues as used in most pubs and pool halls. These cues are weighted and have painted butts, 11mm brass ferrules and screw in 11mm tips.

57" Simulated Butt Pool Cue
52" Simulated Butt Pool Cue
48" Simulated Butt Pool Cue
36" Simulated Butt Pool Cue

This full size, 58 inch, ¾ jointed cue is crafted by Peradon in England from kiln dried, North American Ash and Rosewood.

6 Inch Mini Butt Not Included

Manufacture & Specifications:

The Ash is carefully selected for strength and straightness before being turned and machine spliced to the Rosewood butt timber.

A Rosewood front splice and a Rosewood inlay between two red veneers are then spliced to the butt section to further enhance the appearance.

The cue is then turned to its final tapered finish before the numerous sanding and finishing processes are undertaken to achieve a 'silk smooth' finish.

To eliminate joint problems the two sections of the 'quick action' joint are each precision turned from a single piece of solid brass and precisely fitted 12" from the butt end to give the shaft length of 46"

The butt is finished with a Peradon Crown name disc and 'quick action' butt end joint to accept the optional extensions on the 'related products' section of this page.

Extensions may be fitted into either the ¾ joint in the cue or into the butt end joint.

This cue features a solid brass ferrule and 9 ½ to 10mm Elkmaster tip

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers.

This full size, 58 inch, one piece cue is crafted by Peradon in England from the highest grade, kiln dried, North American Ash and exotic Ebony.

6 Inch Mini Butt Not Included

Manufacture & Specifications

The ash is carefully selected for strength and straightness before the finest, genuine Ebony butt timber is spliced to the cue by hand and the cue is shaped to produce the distinctive four round point pattern of a hand spliced cue.

The decorative Zebrano butt timber and sycamore veneer are then hand spliced to the Ebony butt. In order to reduce stress to the timbers the cue is then shaped over a period of time until the final tapered shape is achieved, after which the numerous sanding and finishing processes are then undertaken to achieve a 'silk smooth' finish.

The butt is finished with a Peradon Chiltern name disc and 'quick action' butt end joint to accept the optional extensions on the 'related products' section of this page.

This cue features a solid brass ferrule and 9 ½ to 10mm Elkmaster tip.

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers. For the highest quality hand spliced cues such as this the selection process is even more rigorous.

Zodiac 3/4 Jointed 8 Ball Pool Cue
This 57” inch cue is crafted by Peradon in England from kiln dried, North American Ash and exotic Ebony.

This 57” inch, three section cue is crafted by Peradon in England from kiln dried, North American Ash and exotic Ebony.

Manufacture & Specifications

The ash is carefully selected for strength and straightness before the finest, genuine Ebony butt timber is spliced to the cue by hand and the cue is shaped to produce the distinctive four round point pattern of a hand spliced cue.

The decorative Olivewood front splice and Sycamore & Black veneers are then hand spliced to the Ebony butt. In order to reduce stress to the timbers the cue is then shaped over a period of time until the final tapered shape is achieved, after which the numerous sanding and finishing processes are then undertaken to achieve a 'silk smooth' finish.

This cue is fitted a 'quick action' joint in the center to make the cue more portable and a 'quick action' dome joint' 8" from the butt of the cue. The dome joint enables the player to quickly remove the bottom 8" of the cue to reveal a rounded end on the shaft. This makes it possible for the player to use the shaft of the cue, which due to the brass dome still has good weight, for those awkward shots in restricted spaces.

To eliminate joint problems both sections of both joints are precision turned from a single piece of solid brass and are fitted to ensure precise alignment.

The butt is finished with a Peradon Vortex name disc and leather butt pad.

This cue features a solid brass ferrule and 8 to 8½mm Elkmaster tip

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers.

This 57” inch, three section cue is crafted by Peradon in England from kiln dried, North American Ash and exotic Ebony.

Manufacture & Specifications

The Ash is carefully selected for strength and straightness before being turned and machine spliced to the finest Ebony butt timber.  

An Ebony front splice and Blue and Red veneers are then spliced to the butt section to further enhance the appearance.

The cue is then turned to its final tapered finish before the numerous sanding and finishing processes are undertaken to achieve a 'silk smooth' finish.

This cue is fitted a 'quick action' joint in the center to make the cue more portable and a 'quick action' dome joint' 8" from the butt of the cue. The dome joint enables the player to quickly remove the bottom 8" of the cue to reveal a rounded end on the shaft. This makes it possible for the player to use the shaft of the cue, which due to the brass dome still has good weight, for those awkward shots in restricted spaces.

To eliminate joint problems both sections of both joints are precision turned from a single piece of solid brass and are fitted to ensure precise alignment.

The butt is finished with a Peradon Warrior name disc and leather butt pad.
This cue features a solid brass ferrule and 8 to 8½mm Elkmaster tip

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers.

This 57 inch, one piece cue is crafted by Peradon in England from the highest grade, kiln dried, North American Ash and exotic Ebony.

6 Inch Mini Butt Not Included

Manufacture & Specifications

The Ash is carefully selected for strength and straightness before the finest, genuine Ebony butt timber is spliced to the cue by hand and the cue is shaped to produce the distinctive four round point pattern of a hand spliced cue.

The Cocobolo front splice with Sycamore, Plum and Sycamore veneers is then hand spliced to the Ebony butt. In order to reduce stress to the timbers the cue is then shaped over a period of time until the final tapered shape is achieved, after which the numerous sanding and finishing processes are then undertaken to achieve a 'silk smooth' finish.

The butt is finished with a Peradon Vector name disc and a 'quick action' butt end joint to accept the optional extensions on the 'related products' section of this page. This cue features a solid brass ferrule and 8 to 8½mm Elkmaster tip.

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers.

One of the games finest players, Walter Lindrum, played with a Peradon cue and in his appreciation for their assistance he hand wrote a contract letter, held by Peradon, giving them the indefinite, sole rights to manufacture cues bearing his name. The original Walter Lindrum Champion is treasured by cue collectors and has now been reintroduced to the Peradon range with the added benefit of some modern day touches such as the quick action joint and butt end joint. This is a full size, 58 inch, 3/4 jointed cue crafted by Peradon in England from the highest grade, kiln dried, North American Ash and exotic Ebony.

6 Inch Mini Butt Not Included

Manufacture & Specifications

The ash is carefully selected for strength and straightness before the finest, genuine Ebony butt timber is spliced to the cue by hand and the cue is shaped to produce the distinctive four round point pattern of a hand spliced cue.

The decorative Bubinga front splice and Sycamore veneer is then hand spliced to the Ebony butt. In order to reduce stress to the timbers the cue is then shaped over a period of time until the final tapered shape is achieved, after which the numerous sanding and finishing processes are then undertaken to achieve a 'silk smooth' finish. The cue shaft is then stamped in the traditional manner with the cue weight to the nearest 1/2 oz.

To eliminate joint problems the two sections of the 'quick action' joint are each precision turned from a single piece of solid brass and precisely fitted 12" from the butt end to give the shaft length of 46".

The butt is finished with a Peradon Walter Lindrum Champion name plate and 'quick action' butt end joint to accept the optional extensions on the 'related products' section of this page.

This cue features a solid brass ferrule and 9 ½ to 10mm Elkmaster tip.

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers. For the highest quality hand spliced cues such as this the selection process is even more rigorous.

This full size, 58 inch, ¾ jointed cue is crafted by Peradon in England from the highest grade, kiln dried, North American Ash and exotic Ebony.

6 Inch Mini Butt Not Included

Manufacture & Specifications

The ash is carefully selected for strength and straightness before the finest, genuine Ebony butt timber is spliced to the cue by hand and the cue is shaped to produce the distinctive four round point pattern of a hand spliced cue.

A large marquetry front splice of Maple and Sapele is then hand spliced to the Ebony butt. In order to reduce stress to the timbers the cue is then shaped over a period of time until the final tapered shape is achieved, after which the numerous sanding and finishing processes are then undertaken to achieve a 'silk smooth' finish.

To eliminate joint problems the two sections of the 'quick action' joint are each precision turned from a single piece of solid brass and precisely fitted 16" from the butt end to give the shaft length of 42".

The butt is finished with a Peradon Winchester name disc and 'quick action' butt end joint to accept the optional extensions on the 'related products' section of this page.

Extensions may be fitted into either the ¾ joint in the cue or into the butt end joint.

This cue features a solid brass ferrule and 9 ½ to 10mm Elkmaster tip.

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers. For the highest quality hand spliced cues such as this the selection process is even more rigorous.

This full size, 58 inch, ¾ jointed cue is crafted by Peradon in England from the highest grade, kiln dried, North American Ash and exotic Ebony.

6 Inch Mini Butt Not Included

Manufacture & Specifications

The ash is carefully selected for strength and straightness before the finest, genuine Ebony butt timber is spliced to the cue by hand and the cue is shaped to produce the distinctive four round point pattern of a hand spliced cue.

The four large Ebony splices with Aqua veneers are then hand spliced to the Ebony butt before a further small Ebony splice and Aqua veneer is spliced to the front.  In order to reduce stress to the timbers the cue is then shaped over a period of time until the final tapered shape is achieved, after which the numerous sanding and finishing processes are then undertaken to achieve a 'silk smooth' finish.

To eliminate joint problems the two sections of the 'quick action' joint are each precision turned from a single piece of solid brass and precisely fitted 16" from the butt end to give the shaft length of 42".

The butt is finished with the distinctive Peradon York name plate and 'quick action' butt end joint to accept the optional extensions on the 'related products' section of this page.

Extensions may be fitted into either the ¾ joint in the cue or into the butt end joint.

This cue features a solid brass ferrule and 9 ½ to 10mm Elkmaster tip.

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers. For the highest quality hand spliced cues such as this the selection process is even more rigorous.

Viper Three Section Cue
This 57” three section cue is manufactured from sports grade Ash offer superb value for money. The upper section of the butt has a metallic burgundy finish whilst the lower section is black with a burgundy decal veneer. . The brass 'Cannon' joints are fitted in the center of the cue and also 10” from the butt. This enables a player playing in a restricted space to remove the 10” section from the butt for the occasional awkward shot. The butt is finished with a Cannon disc decal and a protective rubber butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9mm nominal Blue Chrome Leather tip.

Venom 3/4 Jointed 8 Ball Pool Cue
This 55” cue is crafted by Peradon in England from the highest grade, kiln dried, North American Ash and exotic Ebony.

This 57” ¾ jointed cue is manufactured from sports grade Ash offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated with a decal of a Blue Front Splice with a Blue veneer. The brass 'Cannon' joint is fitted 14” from the butt of the cue . The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and a 9.5 to 10mm Blue Chrome Leather tip.

Cue Length

All sizes are nominal.

This 57” ¾ jointed cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Ebony butt is hand spliced to the ash shaft and a brass 'Cannon' joint is fitted 14” from the butt of the cue. The butt is finished with a Cannon 'Vista' name disc and 'Cannon' butt end joint to accept the 6” mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57” ¾ jointed cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Rosewood butt is hand spliced to the ash shaft and a Rosewood front splice with two Sycamore veneers and one Blue veneer is then spliced to the butt section to further enhance the appearance. The brass 'Cannon' joint is fitted 14” from the butt of the cue . The butt is finished with a Cannon 'Synergy' name disc and 'Cannon' butt end joint to accept the 6” mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57” ¾ jointed cue is manufactured from sports grade Ash to offer superb value for money. The cue features a simulated hand spliced Ebony butt with the brass 'Cannon' joint is fitted in 14” from the butt of the cue . The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and a 9.5 to 10mm Blue Chrome Leather tip.

All sizes are nominal.

This 57” two piece cue is manufactured from sports grade Ash to offer superb value for money. The cue features a simulated hand spliced Ebony butt and a brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For 'push on extensions' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 55” inch, three section cue is crafted by Peradon in England from kiln dried, North American Ash and Rosewood.

Manufacture & Specifications

The Ash is carefully selected for strength and straightness before being turned and machine spliced to the Rosewood butt timber.

A Rosewood front splice and Orange & Blue veneers are then spliced to the butt section to further enhance the appearance.

The cue is then turned to its final tapered finish before the numerous sanding and finishing processes are undertaken to achieve a 'silk smooth' finish.

This cue is fitted a 'quick action' joint in the center to make the cue more portable and a 'quick action' dome joint' 8" from the butt of the cue. The dome joint enables the player to quickly remove the bottom 8" of the cue to reveal a rounded end on the shaft. This makes it possible for the player to use the shaft of the cue, which due to the brass dome still has good weight, for those awkward shots in restricted spaces.

To eliminate joint problems both sections of both joints are precision turned from a single piece of solid brass and are fitted to ensure precise alignment.

The butt is finished with a Peradon Thunder name disc and leather butt pad.

This cue features a solid brass ferrule and 8 to 8½mm Elkmaster tip

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers.

This 57” inch, three section cue is crafted by Peradon in England from kiln dried, North American Ash and Ebony.

6 Inch Mini Butt Not Included

Manufacture & Specifications

The Ash is carefully selected for strength and straightness before being turned and machine spliced to the Ebony butt timber.

A Zebrano front splice and Red veneer is then spliced to the butt section to further enhance the appearance.

The cue is then turned to its final tapered finish before the numerous sanding and finishing processes are undertaken to achieve a 'silk smooth' finish.

The butt is finished with a Peradon Vector name disc and a 'quick action' butt end joint to accept the optional extensions on the 'related products' section of this page. This cue features a solid brass ferrule and 8 to 8½mm Elkmaster tip.

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers.

Scorpion Three Section Cue
This 57” three section cue is manufactured from sports grade Ash offer superb value for money. The upper section of the butt has a metallic silver finish whilst the lower section is black with a burgundy silver veneer. . The brass 'Cannon' joints are fitted in the centre of the cue and also 10” from the butt. This enables a player playing in a restricted space to remove the 10” section from the butt for the occasional awkward shot. The butt is finished with a Cannon disc decal and a protective rubber butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9mm nominal Blue Chrome Leather tip.

Saturn 8 Ball Pool Cue
This 57” cue is crafted by Peradon in England from the highest grade, kiln dried, North American Ash and exotic Ebony.

Manufacture & Specifications

The ash is carefully selected for strength and straightness before the finest, genuine Ebony butt timber is spliced to the cue by hand and the cue is shaped to produce the distinctive four round point pattern of a hand spliced cue.

The four decorative Olivewood splices with Sycamore veneers are then hand spliced to the Ebony butt. In order to reduce stress to the timbers the cue is then shaped over a period of time until the final tapered shape is achieved, after which the numerous sanding and finishing processes are then undertaken to achieve a 'silk smooth' finish.

To eliminate joint problems the two sections of the 'quick action' joint are each precision turned from a single piece of solid brass and precisely fitted 16" from the butt end to give the shaft length of 41".

On this cue the shaft is fitted with the female section of the joint, whilst the butt is fitted with the male. Cleverly, this enables the player to remove the 16" butt section of the cue and screw the 6" mini butt (supplied with the cue) directly into the shaft. This makes a 47" cue for those occasional awkward shots in restricted spaces.

The butt of the cue is also fitted with a 'quick action' butt end joint which will also accept the 6" mini butt supplied with the cue. This lengthens the cue to 63" enabling the player to use the cue more easily on some shots that require a rest.

The butt is finished with a Peradon Hawk name disc.

This cue features a solid brass ferrule and 8 to  8½mm Elkmaster tip.

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers.

Pulsar 3/4 Jointed 8 Ball Pool Cue
This 57” inch cue is crafted by Peradon in England from kiln dried, North American Ash and Rosewood.

Python 3/4 Jointed 8 Ball Pool Cue
This 55” inch cue is crafted by Peradon in England from kiln dried, North American Ash and Rosewood.

This 57” ¾ jointed cue is manufactured from sports grade Ash offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated with four decals of Ebony complimented with Red, White & Blue veneers. The brass 'Cannon' joint is fitted 14” from the butt of the cue . The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and a 9.5 to 10mm Blue Chrome Leather tip.

All sizes are nominal

This 57” ¾ jointed cue is manufactured from sports grade Ash offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated with four decals of Olivewood with Dark Blue and Mid- Blue veneers. The brass 'Cannon' joint is fitted 14” from the butt of the cue . The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and a 9.5 to 10mm Blue Chrome Leather tip.

All sizes are nominal.

This 57” ¾ jointed cue is manufactured from sports grade Ash offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated with a decal of Thuya Burr with a Yellow veneer. The brass 'Cannon' joint is fitted 14” from the butt of the cue. The butt is finished with a Cannon disc decal and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 8.75mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57” two piece cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Rosewood butt is hand spliced to the ash shaft and a Rosewood front splice and Green veneer is then spliced to the butt section to further enhance the appearance. A brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a Cannon 'Spark' name disc and 'Cannon' butt end joint to accept the 6” mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57” two piece cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Rosewood butt is hand spliced to the ash shaft and a brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a Cannon 'Spirit' name disc and 'Cannon' butt end joint to accept the 6” mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.