Pool & Snooker

Dowsing Iron Parts
Our range of replacement parts for Dowsing Billiard table irons.

Replacement three pin plug & flex for Dowsing DB2 iron
Replacement Non-Thermostatic iron element (no cut out in the centre - for old style non-thermostatic irons)
Replacement Thermostatic iron element (with cut out in centre)
Replacement iron stand
Replacement Iron Pressure Pad (for between top case and base)
Replacement Thermostat for a Dowsing DB2 iron only
Replacement Neon light for Dowsing iron

Please Note: Replacement electrical parts should only be fitted by a qualified electrician.

Baulk Marking Pencils
Available in black or white.

Economy Dust Cover
A low cost dust cover with weighted corners, which offers superb value for money. Available in two sizes.

Cover for 5', 6' or 7' tables
Cover for 9', 10' or 12' tables

Fitted Black Dust Cover
These durable black covers have elasticated corners for easy fitting and are available for all table sizes.

Peradon fitted dust cover for 12' (full size) snooker tables
Peradon fitted dust cover for 10' snooker tables
Peradon fitted dust cover for 9' snooker/pool tables
Peradon fitted dust cover for 8' snooker/pool tables
Peradon fitted dust cover for 7' snooker/pool tables
Peradon fitted dust cover for 6' snooker/pool tables

Marking Board Numbers
Replacement self adhesive marking board numbers available in a variety of sizes to suit most marking boards.

18" Chrome Marking Board Numbers (individual strip)
18" Brass Marking Board Numbers (individual strip)
24" Chrome Marking Board Numbers (Set of 3)
24" Brass Marking Board Numbers (Set of 3)
29" Chrome Marking Board Numbers (Set of 3)

Marking Board Pointers
Our range of marking board rods and pointers.

Pair of brass effect pointers
Pair of solid brass pointers
Pair of traditional brass pointers (turned shape)
Pair of chrome pointers
Pair Black Chrome Pointers

Marking Board Rods
Our range of marking board rods and pointers.

Brass effect marking board rod (30" length)
Solid Brass marking board rod (30" length)
Chrome marking board rod (30" length)
Black Chrome Marking Board Road (30" Length)

Pool Table Trolley
Solid metal construction with piston action jacking point.

Height when at lowest position 35cm
Height when at highest position 45cm

Replacement Coin Mechanisms
We offer replacement coin mechanisms and token mechanisms to fit the Peradon ADM and SCT light meters.

Replacement £1 coin mechanism
Replacement 50p coin mechanism
Replacement 20p coin mechanism
Replacement 10p coin mechanism
Replacement 1 Euro coin mechanism
Replacement Token Mechanism

Please Note: Replacement coin mechanisms should be installed by a qualified electrician.

Straight Edges & Half Circles
Straight edges and half circles are used to mark the baulk lines on billiard tables.

12' Straight edge
12' Half circle
10' Straight edge
10' Half circle
9' Straight edge
9' Half circle
8' Straight edge
8' Half circle

Table Shades with 3 Coolie Shades
Supplied complete with ceiling rose, chain and all fittings. The bar on these shades measures 58" making them suitable for 6ft & 7ft tables.

Brassed Table Shade with Brassed Coolie Shades
Brassed Table Shade with Green Coolie Shades
Brassed Table Shade with  Blue Coolie Shades
Chrome Table Shade with Chrome Coolie Shades

 Please Note: This product should be installed by a qualified electrician.

Table spots
We offer a selection of spots for your table.

12.5mm Spots (The usual size for snooker tables)
12.5mm Black Self Adhesive Table Spots -Roll of 100
12.5mm Black Stick On Spots (wet before sticking) -Packet of 50
12.5mm White Stick On Spots (wet before sticking) -Packet of 50

 16mm Spots
16mm Black Stick On Spots (wet before sticking) -Packet of 50

31mm Spots
31mm Black Self Adhesive Table Spots with a white centre -Roll of 100

Timesafe ADM Light Meter
Accumulative single coin 1kVA light meter in robust metal casing.

This single coin light meter will accept one type of coin only, but you can choose which coin mechanism it is supplied with (10p, 20p, 50p, £1, Peradon Token or 1 Euro).

The light time you require per coin can be programmed by using small switches inside the meter.

This is an accumulative meter, meaning that it is possible to insert further coins into the meter when the light is on and the light time on the digital display will accumulate.

Incorrect coins can be rejected from the coin mechanism by pressing the reject button on the fascia.

This meter also features a matchplay key override facility, so that coins do not have to be inserted during tournaments.

Power consumption of the timer is approximately 10W (at 230V AC). Loads of up to 1kVA (3A resistive) can be switched directly by the timer.

Please Note: This product should be installed by a qualified electrician.

Timesafe DCT Light Meter
Accumulative dual coin operation, programmable 7kVA light meter (£1 and 20p only) with a high impact resistant ABS case.

The meter can be programmed to accept £1 coins only, 20 pence coins only or both £1 and 20 pence coins. Different lighting times can be allocated to each coin.

This is an accumulative meter, meaning that further coins can be inserted at any time and the light time remaining will accumulate.

This meter has no coin reject facility, so if an incorrect coin is entered it will fall through to the cash box without the light coming on.

The digital display will show light time remaining and will even advise how much should be in the cash box when emptying.

This meter also features a matchplay key override facility, so that coins do not have to be inserted during tournaments.

Very simple two-button programming.

Power consumption of the timer is approximately 22W (at 230V AC). Loads of up to 7kVA (30A resistive) can be switched directly by the timer.

Please Note: This product should be installed by a qualified electrician.

Ultra Bright LED Snooker Luminaire.
This sleek luminaire is specifically designed for snooker use. The two sections join neatly together to create an ideal sized unit for 10ft or 12ft snooker tables. Each section contains considerably more LED’s than standard LED panels and deliver an extremely bright, crisp, shadow free light over the playing area. The unit is supplied with fixings and adjustable hanging cables, so it can be hung from the ceiling at the ideal height of 115cm above the playing surface. The LED lighting in this unit is integrated and manufactured within the lamp, there is no need to replace bulbs as the actual light cannot be removed and replaced. LED units are longer lasting and more cost effective and energy efficient.

Please Note: This LED snooker luminaire should only be installed by a qualified electrician in accordance with local Building Regulations. Please read all these instructions thoroughly before installation.