Pool & Snooker

This screw-on extension is designed to fit ¾ jointed Cannon snooker cues from the current range. This timber extension has an ebonised finish and measures 28'' in length. This extension is fitted by removing the butt section of the ¾ jointed cue and screwing the extension directly on to the ¾ shaft. For compatibility this extension features the same male 'Cannon' joint as used on Cannon cues, so the extension can be secured to the female joint on the shaft precisely and quickly.

All sizes are nominal.

Aramith Premier Snooker Ball Sets (with 10 Reds)
Perfectly round and balanced with uniform weight and hardness. These phenolic balls last up to five times longer than other balls made from polymers or polyester. With this durability they are the logical choice. Made in Belgium.

2" (51mm) Snooker Set
1 7/8" (47.5mm) Snooker Set
1 3/4" (44mm) Snooker Set
1 5/8" (41mm) Snooker Set
1 1/2" (37.5mm) Snooker Set
1 3/8" (35mm) Snooker Set

Aramith Premier Snooker Ball Sets (with 15 Reds)
Perfectly round and balanced with uniform weight and hardness. These phenolic balls last up to five times longer than other balls made from polymers or polyester. With this durability they are the logical choice for commercial and private table owners. Made in Belgium.

All these snooker sets have 15 red balls

S3701 2 1/4" (57mm) Snooker Set (for playing snooker on a 9 ball table)

S3721 2 1/16" (52.5mm) Snooker Set (Full Size Snooker Balls)

S3731 2" (51mm) Snooker Set

Aramith Premier Engraved Pool Balls
Aramith engraved phenolic pool balls are the highest quality pool balls available. Unlike screen printed balls where the colour and number are on the surface only the colour on engraved balls runs right through the ball and the number is part of the material. Perfectly round and balanced with uniform weight and hardness. These phenolic balls last up to five times longer than other balls made from polymers or polyester. With this durability they are the logical choice. Made in Belgium.

2 1/4"
2 1/16"
2"

Sets of pool balls comprising of either Red & Yellows as used in most commercial situations. Almost all commercial tables use 2" balls and if they are coin-operated require a slightly smaller, 1 7/8", white cue ball. The cue ball is smaller so that it will pass through coin-operated pool tables and be returned after potting. All balls are made in Belgium and three qualities are available. All balls are quality phenolic balls however the Premier quality (in a Green box) are more highly finished than the Standard Quality (in a White Box). The Standard white boxed balls still being extremely hard wearing and slightly less expensive are most popular with table operators. The "Super Aramith Pro 8 Ball Set" (in blue and gold box) is made from Super Aramith Pro resin which is used worldwide in all major tournaments and championships because of its uncompromised quality. The Super Aramith Pro has professional specifications in all criteria: density, balance, diameter, roundness, colour, glossiness, hardness and weight.

Aramith Screen Printed Pool balls
Aramith screen printed balls are manufactured from durable phenolic resin, however in order to reduce the cost the colours and numbers are printed onto the surface of the ball. Although not as durable as the engraved quality these balls offer good value for domestic use. Perfectly round and balanced with uniform weight and hardness. These phenolic balls last up to five times longer than other balls made from polymers or polyester. Made in Belgium.

2"
1 7/8"
1 5/8
1 1/2

Sets of pool balls comprising of either Red & Yellows or Blue & Yellows as used in most commercial situations. Almost all commercial tables use 2" balls and if they are coin operated require a slightly smaller, 1 7/8", white cue ball. The cue ball is smaller so that it will pass through coin operated pool tables and be returned after potting. All balls are made in Belgium and three qualities are available. All balls are quality phenolic balls however the Premier quality (in a Green box) are more highly finished thant the Standard Quality (in a White Box). The Standard white boxed balls still being extremely hard wearing and slighly less expensive are most popular with table operators. The "Super Aramith Pro 8 Ball Set" (in blue and gold box) is made from Super Aramith Pro resin which is used worldwide in all major tournaments and championships because of its uncompromised quaity. The Super Aramith Pro has professional specifications in all criteria: density, balance, diameter, roundness, colour, glossiness, hardness and weight. The Super Aramith Pro is supplied with a 1 7/8" Pro-Cup cue balls with six red dots on.

Balls with 17/8" cue balls for coin operated tables:

S3736-SCBS   2" Standard Reds & Yellows with a 17/8" cue ball

S3736-SCB     2" Premier Reds & Yellows with a 1 7/8" cue ball

S3735-SCB     2" Premier Blues & Yellows with a 1 7/8" cue ball

S3739             2" Super Aramith Pro Cup with 1 7/8" Pro Cup cue ball

 

Balls for Domestic Tables (with cue balls the same size as other balls)

3736     2" Premier Reds & Yellows with a 2" cue ball

3746     1 7/8" Premier Reds & Yellows with a 2" cue ball

This black attache style case features a black flocked foam interior to hold the cue securely in place.

All sizes are nominal.

Ball Trays
Available in 22 or 16 ball plastic trays

22 ball tray
16 ball tray

New orders on Halo Cases will go on backorder - Due End of December.
If you would like a special Case have a look at the personalised handmade fibreglass cases or contact us

Black & Red Patch 'Halo' Thin Case for One Piece Cue
Halo cases are of aluminium construction and offer both maximum cue protection and superb looks. The exterior is upholstered with hard-wearing leather look material to create a very attractive cue case. The hinge is an integral part of the shape of the case making it extremely robust. The catches are of the highest quality with a highly polished chrome finish. The interior is black flocked foam to hold the cue securely in place. Many players like this case as holding just one cue is very thin and easy to handle. If you would prefer a wider Halo case with more interior channels see the Halo Wide or the Extra Wide Halo Plus.

Black and White Clubman Case for One Piece Cues
This attractive and robust case with leather look covering and attractive embroidery offers superb value for money. The mock suede interior is padded to hold the cue securely in place.

New orders on Halo Cases will go on backorder - Due End of December.
If you would like a special Case have a look at the personalised handmade fibreglass cases or contact us

Halo cases are of aluminium construction and offer both maximum cue protection and superb looks. The exterior is upholstered with hard-wearing leather look material to create a very attractive cue case. The hinge is an integral part of the shape of the case making it extremely robust. The catches are of the highest quality with a highly polished chrome finish. The interior is black flocked foam to hold the cue securely in place. Many players like this case as holding just one cue is very thin and easy to handle. If you would prefer a wider Halo case with more interior channels see the Halo Wide or the Extra Wide Halo Plus.

Black Fibre Ferrule
Primarily use for Chinese 8 ball but also being used for the game of snooker

Size 10.25mm nominal

Pack of 10

Blue Diamond Leather Tips
The best-known snooker tip in the world. Made in the USA by Brunswick from hand-selected water buffalo hide. This tip is infused with velvet-grade silica for maximum adherence and formed under 40,000 pounds of pressure to ensure uniform density.

Card of 5  9mm
Card of 5 10mm
Card of 5 11mm

Box of 50 9mm
Box of 50 10mm
Box of 50 11mm

Brass Ferrules for Screw In Tips
Solid Brass ferrule designed to accept 3/16" thread screw in tips, supplied in bags of 10

Brass Ferrules for use with stick on tips
Precision turned solid brass ferrules with an internal thread (supplied in bags of 10)

Bag of 10 ferrules - 6.5mm
Bag of 10 ferrules - 7mm
Bag of 10 ferrules - 7.5mm
Bag of 10 ferrules - 8mm
Bag of 10 ferrules - 8.25mm
Bag of 10 ferrules - 8.5mm
Bag of 10 ferrules - 8.75mm
Bag of 10 ferrules - 9mm
Bag of 10 ferrules - 9.25mm
Bag of 10 ferrules - 9.5mm
Bag of 10 ferrules - 9.75mm
Bag of 10 ferrules - 10mm
Bag of 10 ferrules - 10.25mm
Bag of 10 ferrules - 10.5mm
Bag of 10 ferrules - 11mm
Bag of 10 ferrules - 12mm

Cougar Three Section Cue
This 57'' three section cue is manufactured from sports grade Ash offer superb value for money. The cue features a machine spliced Cherrywood butt with brass 'Cannon' joints fitted in the centre of the cue and also 10” from the butt. This enables a player playing in a restricted space to remove the 10” section from the butt for the occasional awkward shot. The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

This shorter 48 two piece cue is manufactured from sports grade Ash is ideal for younger players and offers superb value for money. The cue features a simulated hand spliced Ebony butt and a brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For 'push on extensions' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57'' ¾ jointed cue is manufactured from sports grade Ash offers superb value for money. The cue features a simulated hand spliced Ebony butt decorated with four decals of Snakewood with White veneers. The brass 'Cannon' joint is fitted 14'' from the butt of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and a 9.5 to 10mm Blue Chrome Leather tip.

All sizes are nominal.

This 57'' two piece cue is manufactured from sports grade Ash to offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated a with decal of Thuya Burr with a Red Veneer. The brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For 'push on extensions' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

Cue Length

All sizes are nominal.

This 57'' two piece cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Rosewood butt is hand spliced to the ash shaft and light rosewood front splices and sycamore veneers are then spliced to the butt section to further enhance the appearance. A brass 'Cannon' joint is fitted in the centre of the cue. The butt is finished with a Cannon 'Focus' name disc and 'Cannon' butt end joint to accept the 6'' mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57'' ¾ jointed cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Ebony butt is hand spliced to the ash shaft and an Ebony front splice with Mid-Blue, Blue and Mid-Blue veneers is then spliced to the butt section to further enhance the appearance. The brass 'Cannon' joint is fitted 14 from the butt of the cue. The butt is finished with a Cannon 'Grande' name disc and 'Cannon' butt end joint to accept the 6 mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57¾ jointed cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Rosewood butt is hand spliced to the ash shaft and a Rosewood front splice and Red veneer are then spliced to the butt section to further enhance the appearance. The brass 'Cannon' joint is fitted 14'' from the butt of the cue. The butt is finished with a Cannon 'Magic' name disc and 'Cannon' butt end joint to accept the 6'' mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

Manta Three Section Cue
This 57'' three section cue is manufactured from sports grade Ash offers superb value for money. The cue features a simulated machine spliced Ebony butt with brass 'Cannon' joints fitted in the centre of the cue and also 10'' from the butt. This enables a player playing in a restricted space to remove the 10'' section from the butt for the occasional awkward shot. The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 8.75mm nominal Blue Chrome Leather tip.

This 57” two piece cue is manufactured from sports grade Ash to offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated a with decal of Tulipwood with Red & Blue veneers. The brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For 'push on extensions' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

Cue Length

All sizes are nominal.

This 57” ¾ jointed cue is manufactured from sports grade Ash offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated with a decal of Thuya Burr with a Yellow veneer. The brass 'Cannon' joint is fitted 14” from the butt of the cue. The butt is finished with a Cannon disc decal and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 8.75mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57'' two piece cue is manufactured from sports grade Ash to offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated a with decal of Snakewood with a White veneer. The brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For 'push on extensions' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

Cue Length

All sizes are nominal.

This 57'' two piece cue is manufactured from sports grade Ash offer superb value for money. The cue features a machine spliced Rosewood butt decorated with a decal of Snakewood with a Red veneer. The brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For 'push on extensions' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57''¾ jointed cue is manufactured from sports grade Ash offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated with four decals of Ebony complimented with Red, White & Blue veneers. The brass 'Cannon' joint is fitted 14” from the butt of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and a 9.5 to 10mm Blue Chrome Leather tip.

All sizes are nominal

This 57¾ jointed cue is manufactured from sports grade Ash offer superb value for money. The cue features a simulated hand spliced Ebony butt decorated with four decals of Olivewood with Dark Blue and Mid- Blue veneers. The brass 'Cannon' joint is fitted 14” from the butt of the cue . The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and a 9.5 to 10mm Blue Chrome Leather tip.

All sizes are nominal.

This 57'' two piece cue is manufactured from sports grade Ash offer superb value for money. The butt section has a metallic black finish and the butt end is decorated with a white veneer decal. The brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a Cannon disc decal and a protective rubber butt pad. For 'push on extensions' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57'' two piece cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Rosewood butt is hand spliced to the ash shaft and a Rosewood front splice and Green veneer is then spliced to the butt section to further enhance the appearance. A brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a Cannon 'Spark' name disc and 'Cannon' butt end joint to accept the 6” mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57'' two piece cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Rosewood butt is hand spliced to the ash shaft and a brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a Cannon 'Spirit' name disc and 'Cannon' butt end joint to accept the 6” mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57''¾ jointed cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Rosewood butt is hand spliced to the ash shaft and a Rosewood front splice with two Sycamore veneers and one Blue veneer is then spliced to the butt section to further enhance the appearance. The brass 'Cannon' joint is fitted 14'' from the butt of the cue . The butt is finished with a Cannon 'Synergy' name disc and 'Cannon' butt end joint to accept the 6'' mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57''¾ jointed cue is manufactured from sports grade Ash to offer superb value for money. The cue features a simulated hand spliced Ebony butt with the brass 'Cannon' joint is fitted in 14'' from the butt of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For a 'screw on extension' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and a 9.5 to 10mm Blue Chrome Leather tip.

All sizes are nominal.

This 57'' two piece cue is manufactured from sports grade Ash to offer superb value for money. The cue features a simulated hand spliced Ebony butt and a brass 'Cannon' joint is fitted in the center of the cue. The butt is finished with a brass Cannon disc and a protective leather butt pad. For 'push on extensions' to fit this cue please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

This 57 jointed cue is manufactured from sports grade Ash which is further selected to offer superb value for money. The genuine Ebony butt is hand spliced to the ash shaft and a brass 'Cannon' joint is fitted 14'' from the butt of the cue. The butt is finished with a Cannon 'Vista' name disc and 'Cannon' butt end joint to accept the 6'' mini butt supplied with this cue. For additional extension options please view the 'related products' section of this page. This cue features a solid brass ferrule and 9.5 to 10mm nominal Blue Chrome Leather tip.

All sizes are nominal.

Chester 3/4 Jointed Cue
This full size, 58 inch, ¾ jointed cue is crafted by Peradon in England from the highest grade, kiln dried, North American Ash and spliced with Ebonex. Ebonex was developed by Peradon to be the perfect rigidity for play and to be more consistent in density than any traditional timber butt to create superior playing characteristics.

Manufacture & Specifications

The ash is carefully selected for strength and straightness before the Ebonex composition is spliced to the cue by hand and the cue is shaped to produce the distinctive four round point pattern of a hand spliced cue.

A Zebrano front splice and Sycamore and Light blue veneer are then spliced to the butt section to further enhance the appearance.

The cue is then turned to its final tapered finish before the numerous sanding and finishing processes are undertaken to achieve a 'silk smooth' finish.

To eliminate joint problems the two sections of the 'quick action' joint are each precision turned from a single piece of solid brass and precisely fitted 14" from the butt end to give the shaft length of 44".

The butt is finished with a Peradon Chester name disc and 'quick action' butt end joint to accept the optional extensions on the 'related products' section of this page.

Extensions may be fitted into either the ¾ joint in the cue or into the butt end joint

This cue features a solid brass ferrule and 9 ¬Ω to 10mm Elkmaster tip.

* The quality of the ash shaft is of the utmost importance when crafting a cue. Shafts are extensively selected with only a small percentage of the pieces processed making the grade for production of these cues. In order to maintain the highest standards of selection Peradon purchase more ash than any other English cue makers. For the highest quality hand spliced cues such as this the selection process is even more rigorous.

Dowsing Iron Parts
Our range of replacement parts for Dowsing Billiard table irons.

Replacement three pin plug & flex for Dowsing DB2 iron
Replacement Non-Thermostatic iron element (no cut out in the centre - for old style non-thermostatic irons)
Replacement Thermostatic iron element (with cut out in centre)
Replacement iron stand
Replacement Iron Pressure Pad (for between top case and base)
Replacement Thermostat for a Dowsing DB2 iron only
Replacement Neon light for Dowsing iron

Please Note: Replacement electrical parts should only be fitted by a qualified electrician.

Elk-Pro Tips
The Elk-Pro is a professional version of the ever popular Elk Master tip, it was developed for more serious players who like the characteristics of the Elk Master tip but are looking for greater consistency and require the option of Soft, Medium or Hard tips. It is manufactured to unprecedented tolerances of shape and hardness by the world's most respected tip makers, Tweeten Fibre co. in the U.S.A. Boxes of three tips are available in sizes 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 13mm & 14mm in the Soft, Medium or Hard options.

• Made using only hand selected leather from the prime portion of the hide.
• New enhanced treatment processes eliminate impurities and ensure total saturation of the leather.
• Pressed into shape using a new technique to improve consistency of shape.
• Tip consistency maintained through new accurate hardness testing techniques.
• The fibre of the tips has been maintained so even the hard tips do not feel or sound too solid.
• Incredible grip and chalk adhesion.
• The perfect partner for Triangle-Pro chalk.

Elk-Pro tips - Box of three 9mm Soft tips.
Elk-Pro tips - Box of three 9mm Medium tips.
Elk-Pro tips - Box of three 9mm Hard tips.
Elk-Pro tips - Box of three 9.5mm Soft tips.
Elk-Pro tips - Box of three 9.5mm Medium tips.
Elk-Pro tips - Box of three 9.5mm Hard tips.
Elk-Pro tips - Box of three 10mm Soft tips.
Elk-Pro tips - Box of three 10mm Medium tips.
Elk-Pro tips - Box of three 10mm Hard tips.
Elk-Pro tips - Box of three 10.5mm Soft tips.
Elk-Pro tips - Box of three 10.5mm Medium tips.
Elk-Pro tips - Box of three 10.5mm Hard tips.
Elk-Pro tips - Box of three 11mm Soft tips.
Elk-Pro tips - Box of three 11mm Medium tips.
Elk-Pro tips - Box of three 11mm Hard tips.
Elk-Pro tips - Box of three 13mm Soft tips.
Elk-Pro tips - Box of three 13mm Medium tips.
Elk-Pro tips - Box of three 13mm Hard tips.
Elk-Pro tips - Box of three 14mm Soft tips.
Elk-Pro tips - Box of three 14mm Medium tips.
Elk-Pro tips - Box of three 14mm Hard tips.

Elkmaster Tips
The world's best selling snooker cue tip for many years manufactured from blue chrome leather by Tweeten Fibre Co in the U.S.A.

Card of five 8mm tips
Card of five 8.5mm tips
Card of five 9mm tips
Card of five 9.5mm tips
Card of five 10mm tips
Card of five 11mm tips
Card of five 12mm tips
Card of five 13mm tips

Box of fifty 8mm tips
Box of fifty 8.5mm tips
Box of fifty 9mm tips
Box of fifty 9.5mm tips
Box of fifty 10mm tips
Box of fifty 11mm tips
Box of fifty 12mm tips
Box of fifty 13mm tips

Peradon hand made leather cases are truly stunning cases. Whilst many alternative cases may look good in photographs these cases are skilfully constructed by hand down with attention right to the smallest detail. They are constructed as a wooden case which is then beautifully upholstered with the finest quality leather on the exterior and with suede leather on the padded interior which holds the cue in place. The smooth rounded leather case ends are a testament to the skill of the case maker. The solid brass hinges and catches are of the highest quality as are the leather straps and buckles. The interior compartments of this case have been cleverly thought out to be much more versatile than most other cases, whilst keeping the length to a minimum. The case will hold a cue with a shaft length up to 47'' and along with the butt, section will hold additional extensions and butt end extensions. Alternatively the case can also be used to carry two cues without extensions. For details of the compartment sizes please see the chart below. We recommend that you measure the length of your cue including any protruding joints to ensure they will fit. If you are considering purchasing in conjunction with a cue offered by Peradon details of all cue shaft, butt and extension lengths can be found on this website. The exterior of the case is embossed with the distinctive Peradon trademark.

All sizes are nominal.